Sodeca HGT/CL Large diameter tubular axial fan
Tubular axial fans equipped with 6 or 9 blade aluminum propellers with various angles of inclination.
Impellers made of cast aluminium with 6 or 9 blades with adjustable angle of inclination.
Tubular casing in sheet steel.
Class F motors with ball bearings and IP55 protection.
Please indicate in the quote form the model and other information that may help us provide you with the most suitable product (flow rate, three-phase/single-phase, number of poles, dimensions, materials...).
Fan:
- Tubular casing in sheet steel.
- Impellers made of cast aluminium with 6 or 9 blades with adjustable angle of inclination.
- Airflow direction from motor to impeller.
- The long casing version is equipped with an inspection hatch.
Motor:
- Class F motors with ball bearings and IP55 protection.
- Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
- Working temperature: -25 ºC +50 ºC.
- Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
- Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
Finish:
Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
- Airflow direction from impeller to motor.
- 100% reversible impellers.
- Special windings for different voltages.
- ATEX certified Category 2.
- 2 speed motors.
- The support feet are supplied as an accessory.
