SODECA HCH single-phase wall-mounted helical fan of great robustness
Single-phase wall-mounted axial fan with plastic propeller.
Anti-corrosive finish in polyester resin polymerized at 190°C, after degreasing with phosphate-free nanotechnological treatment.
100% reversible propellers.
Special windings for different voltages.
Anti-corrosion finish in polyester resin polymerized at 190°C, after degreasing with a phosphate-free nanotechnological treatment.
Fan Features
- PL version propeller in fiberglass-reinforced polyamide 6.
- Motor-propeller air direction.
- Sheet steel support ring.
- Al version equipment available in cast aluminum. 40-2T models only in AL version.
Motor
- Operating temperature: -25 ºC +50 ºC.
- IE3 efficiency motors for power equal to or greater than 0.75 kW, except single-phase, 2-speed, and 8-pole motors.
- Class F motors with ball bearings and IP55 protection. Except single-phase models from size 45 to size 56, with IP54 protection. 1 or 2 speeds depending on the model.
- Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers over 4 kW).
-
On request:
- Air-to-motor propeller direction.
- 100% reversible propellers.
- Special windings for different voltages.
- ATEX Certification Category
