Noise protection ear plugs 1000 pcs

Compliant with the essential requeriments of the Directive 89/686/EEC and the general requeriments of the standard EN352-2-2002.

These ear plugs must be worn at all times in noise environments (atmospheres greater than 80 dB) and must be chosen according to their attenuation factors in relation to the ambient noise to be reduced. Ensure that they are correctly fifted, adjusted, maintained and inspected in accordance with this instructions. If these are not complied with, the protection provided by the ear will be considered reduced.

Adjustments:

Ensure that the ear plugs are correctly inserted, adjusted and worn according to the instructions below. The following manipulations must always be carried out with clean hands.

• Roll the ear pñug between your fingers to obtain a very thin cylinder.
• Pull down on the ear lobe to open the ear canal and insert the plug using slight rotating motion.
• Maintain for a few seconds and allow the plug to recover it shape within the ear canal.

PPE Directive 89/686/EEC PPE DIRECTIVE 89/686/EEC

EN352-2 Hearing protection : Earplug 
SNR 37 dB Standard noise reduction
H 36 High frequency attenuation
M 34 Medium frequency attenuation
L 33 Low frequency attenuation
USA STANDARDS

American National Standards Institute
ANSI S3.19-1974 American National Standards Institute 
NRR 32 dB NRR (Noise Reduction Rating)